NEW 800 SERIES!
PRODUCT HIGHLIGHTS
- Turn your lights on, dim them, or turn them off from the wall dimmer or through Z-Wave
- NEW 800 chip: more range, faster signal, SmartStart inclusion S2 security
- Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
- What's the difference between the ZEN77 and the ZEN72 model?
- TRIAC Dimmer: use with high-quality LED bulbs up to 100 W or incandescent bulbs up to 300 W (do NOT connect to tube lights, halogen bulbs, transformers, chandeliers, fans, switched receptacles, or CFL bulbs, FEIT bulb are NOT recommended)
-
Simple Direct 3-Way & 4-Way: Less rewiring for more multi-point control scenarios like 4-ways and 5-ways where load and line are in separate boxes. Use it the same way as the ZEN27 dimmer. Neutral wire required.
- Replaceable paddles (almond, brown, and black paddle kits available)
- Small profile (just 1.1" deep) to fit easily in a crowded or shallow box
- Adjustable LED indicator: choose the color and brightness that works for you!
- Night Light Mode: press and hold the lower paddle when dimmer is off to turn the light on to low brightness
- Scene Control (select hubs only): activate scenes and trigger other devices with multi-tap*
- You choose the color and brightness level of the LED indicator*
-
Programmable double tap and single tap for truly customized control*
-
Adjustable ramp rate and maximum/minimum brightness levels*
-
OTA firmware updates for a future-proof device
- Signal repeater will make your Z-Wave network more reliable
- Use a standard-size wall plate for single gang installations (wall plate not included)
- 5-year extended warranty () and lifetime tech support
- Check out
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
Not sure which dimmer model to choose?
Here is a simplified overview of the recommended dimmer models for the most common scenarios (read the full guide above for more details):
PRODUCT CONDITION
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
- NEW: brand new product, as delivered by the factory
- OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
- REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire jumper, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
- USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire jumper, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description
SPECIFICATIONS
- Z-Wave Region: US/MX/CA
- Power: 120 VAC, 60 Hz
- Maximum Load: 100 W LED, 300 W incandescent
- Z-Wave Range: Up to 200 feet line of sight, up to 1 mile with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
- Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
- Operating Temperature: 32-104° F (0-40° C)
- Installation: Indoor use only
RESOURCES
WORKS WITH
- (recommended for Zooz products)
- 2GIG (no advanced settings available)
- Abode (no advanced settings available)
- ADT Pulse (no advanced settings available)
- Almond (Securify) (no advanced settings available)
- Fibaro Home Center 2
- Home Assistant ()
- HomeSeer (with Z-Wave Plus )
- Homey ()
- Hubitat
- InControl
- ISY
- Ring (no advanced settings or scene control)
- SmartThings ( to access the custom lua driver for advanced functionality)
- Wink and Wink 2 (no advanced settings)
NOTE: If you don't see your Z-Wave controller on the list above, please before you purchase this product.
CUSTOM ENGRAVING
You can now order a custom engraving for you smart switch paddles from our partners at ! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.
INSTALLATION
Please follow the manual carefully and refer to the supplied diagrams when installing your Zooz switches. It's recommended that a licensed electrician performs the installation.
Check for neutral connections BEFORE you buy. A white wire from a 14-3 romex is usually NOT a neutral. if you're not sure what to look for, we'll be happy to help!
How to include the 800 Series S2 Dimmer to your smart home hub?
1. Make sure the dimmer is located within range of your Z-Wave network
2. Put your Z-Wave controller in inclusion/pairing mode
3. Tap the upper paddle of the dimmer 3 times quickly to finalize the inclusion process
4. A new dimmer switch will appear on your controller's device list
NOTE: Follow an appropriate diagram from the manual to wire the dimmer in a 3-way or 4-way setting with a regular on/off electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.
